关于delphi PAServer 远程调节和测验DLL文件,

用PAServer调节和测验的话会爆发三个私下认可user-connectionname的公文夹,且那个文件夹无法自定义。由此不能使调节和测量试验的dll文件生成到host主程序所在的公文夹下而招致不可能调节和测量检验。

【yzc888官网手机客户端】远程调试,远程调试DLL文件。 

变通方法:

在情形变量中加进user-connectionname的文本夹所在的路子。经测验可行。

PAServer 远程调节和测量试验DLL文件,
用PAServer调节和测量试验的话会发生三个私下认可user-connectionname的文件夹,且那些文件夹无法自定义。由此无法使调节和测量试验…

Remote debugging lets you debug a RAD Studio application running on a
remote computer. Once the remote debug server is running on the remote
computer, you can use RAD Studio to connect to that computer and begin
debugging. 

Prerequisites and security considerations for remote debugging

  • The local and remote computers must be connected through TCP/IP.
  • All of the files required for debugging the application must be
    available on the remote computer before you begin debugging. This
    includes executables, DLLs, assemblies, data files, and PDB (debug)
    files.
  • In addition to the port that the remote debug server listens on, a
    connection is opened for each application that is being debugged.
    Additional port numbers are chosen dynamically by Windows; a
    firewall that only allows connections to the listening port will
    prevent the remote debugger from working.

Warning: The connection between RAD Studio and the remote debug
server is a simple TCP/IP socket, with neither encryption nor
authentication support. Therefore, the remote debug server should not be
run on a computer that can be accessed over the network by untrusted
clients.

To install and start the remote debug server

  1. If RAD Studio is installed on the remote computer, skip to step 4.
    In this case, the remote debug server (rmtdbg105.exe) is already
    available, by default, atC:\Program Files\CodeGear\RAD
    Studio\6.0\Bin.
  2. Copy rmtdbg105.exe from the RAD Studio\bin directory on your local
    computer to the directory of your choice on the remote computer. If
    you are debugging a managed application, also copy
    dbkpro<nnn>.dll
  3. If you are debugging a managed application, register
    dbkpro<nnn>.dll on the remote computer by running the
    regsvr32.exe registration utility. For example, on Windows XP, enter
    C:\Windows\System32\regsvr32.exe dbkdebugproide<nnn>.bpl at
    the command prompt.
  4. On the remote computer, run rmtdbg105.exe using the following
    syntax: rmtdbg105.exe [-listen [hostname:]port] where:

    1. hostname is an optional host name or TCP/IP address for binding
      to a particular host, for example, somehost or 127.0.0.1. If you
      specify hostname, you must also specify :port.
    2. port is an optional (required if hostname is specified) port
      number or standard protocol name, for example, 8000 or ftp. If
      omitted, 64447 is used as the port number. Examples:
    3. rmtdbg120.exe
    4. rmtdbg120.exe -listen 8000
    5. rmtdbg120.exe -listen somehost:8000
    6. rmtdbg120.exe -listen 127.0.0.1:8000

相关文章